Updated November 2026
If you want to get rid of clover in a buffalo lawn, the most reliable approach is to make the grass denser, lower the soil conditions that favor clover, and remove the clover patches that remain by hand or with a targeted, pollinator-conscious treatment. This guide walks through each step in order, so you can thin out clover over one or two growing seasons without stripping the rest of your turf or exposing the yard to harsh chemicals.
Buffalo grass is a warm-season native that naturally tolerates drought and low fertility. Clover, on the other hand, thrives in thin, low-nitrogen soil and fills gaps the moment the turf opens up. That difference is the key to the whole problem: you are not really fighting clover so much as fighting the bare spots and conditions that let it spread.
Shopping for one? See our guide: How to Get Rid of Clover in Centipede Lawn: 4 Best Weed Killers Compared (2026).
Why Clover Shows Up in Buffalo Lawns
Clover is a legume. It pulls nitrogen from the air through bacteria in its roots, which gives it an edge in soils where nitrogen is scarce. Buffalo grass is also fairly low-input, so many owners never fertilize much at all. That combination leaves room for clover to move in, especially in these situations:
- Thin areas where buffalo grass has not filled in after drought or foot traffic
- Compacted soil along paths, near driveways, or where the mower turns
- Mowing too low, which stresses buffalo grass and opens up the canopy
- Overwatering in short bursts, which favors shallow-rooted clover over deeper buffalo roots
- Soil with a pH outside the range buffalo grass prefers
Before you do anything else, walk the lawn and note where clover is concentrated. Those spots tell you which of the steps below will matter most.
Step 1: Test Your Soil Before Changing Anything
A basic soil test is the cheapest diagnostic you can run. Most state cooperative extension offices offer testing for a modest fee, and results usually list pH, phosphorus, potassium, and organic matter. Buffalo grass generally does well in slightly alkaline to neutral soil, roughly pH 6.5 to 8.0, though you should confirm against your own report.
If the test shows low phosphorus or potassium, correct those first. Clover often stays put when the grass is starved for nutrients the clover can scavenge more easily. If the soil is compacted or heavy clay, plan on aeration in the coming steps.
What to Look for in Your Results
| Soil Result | What It Suggests | Action |
|---|---|---|
| pH below 6.0 | Acidic soil, which can favor clover and weeds | Discuss lime rates with your extension office |
| Low phosphorus | Grass is struggling to establish | Apply a slow-release, low-phosphorus-risk organic source as directed |
| High compaction | Shallow roots, poor water infiltration | Core aerate in the growing season |
| Low organic matter | Weak soil structure | Topdress with compost |
Step 2: Adjust Your Mowing Height and Schedule
Buffalo grass is typically kept at 3 to 4 inches, and many owners let it grow taller. Mowing below about 2.5 inches weakens the turf and leaves gaps where clover can establish. Raise the mower deck, leave the clippings in place when possible, and avoid mowing when the grass is stressed by heat or drought.
Mow on a consistent schedule so the grass never gets cut more than one-third of its height in a single pass. Keep the blade sharp, since dull blades tear the leaves and make the turf more vulnerable.
Step 3: Aerate and Topdress to Thicken the Turf
Dense turf is the single most effective defense against clover. Core aeration in late spring or early summer, when buffalo grass is actively growing, pulls small plugs of soil and relieves compaction. Follow up by spreading a thin layer of screened compost, about a quarter inch, and working it into the holes with a rake or drag mat.
Aeration also gives buffalo grass stolons room to spread into bare patches. Over a season or two, you will often see the grass close the gaps that clover had been using.
Tools You Will Need
- Core aerator (rental or walk-behind)
- Screened compost
- Leaf rake or lawn drag mat
- Garden hose for light watering afterward
Step 4: Hand-Pull and Spot-Treat Clover Patches
For a small or moderate clover problem, hand pulling is often enough. Clover has shallow roots, so pull when the soil is moist, which makes it easier to get the whole plant. Work in the morning or after a light rain, and pull the entire patch rather than just the leaves.
If clover covers a larger area, consider spot-treating with a natural product. Corn gluten meal is a pre-emergent that suppresses seed germination, so it helps prevent new clover but does not kill established plants. Organic broadleaf options made from iron or fatty acids can burn back existing clover, but they will also brown nearby grass and should be applied carefully, on still days, with a sprayer or wand to target only the clover.
Read the label carefully before using any spot treatment, and keep applications away from flowering plants when bees are active. Mid-morning to early afternoon is when many pollinators are foraging, so spraying in early morning or evening, when the clover flowers are closed, reduces risk.
Step 5: Feed the Buffalo Grass, Not the Clover
Clover produces its own nitrogen, so it does not need much from the soil. Buffalo grass does. Applying a modest amount of slow-release organic nitrogen in late spring gives the grass a competitive advantage. Feeding more heavily than needed can backfire by encouraging lush weeds, so follow the rate on the product label and avoid fertilizing in late summer.
Water deeply but infrequently. Buffalo grass prefers a soak every week or two rather than daily sprinkling, which keeps the top layer of soil drier and discourages clover seedlings.
Step 6: Monitor, Repeat, and Keep Gaps Closed
Clover removal is rarely a one-time job. Walk the lawn every few weeks through the growing season and pull new seedlings as soon as you spot them. Track which areas keep coming back, and look at the conditions there: is the soil still compacted, is the mower too low, is the spot shaded by a fence or tree?
Consistency over two or three seasons usually produces a clear difference. The grass thickens, the clover shrinks to scattered individual plants, and the lawn becomes easier to maintain.
Common Mistakes
- Scalping the lawn. Cutting buffalo grass too short invites clover and weakens the turf.
- Overusing nitrogen. Heavy feeding can favor fast-growing weeds and makes buffalo grass more prone to disease.
- Watering every day. Frequent shallow watering keeps the surface moist, which clover seedlings enjoy.
- Spraying during bloom. Treating clover while it flowers can harm bees and other pollinators.
- Expecting instant results. Thickening buffalo grass takes a full growing season or more.
- Ignoring compaction. Heavy traffic zones often stay weedy until the soil is loosened.
Recommended Gear
A few tools make the process faster and more precise. Look for these product types:
- Walk-behind core aerator: Relieves compaction and opens the soil for buffalo grass runners. View on Amazon
- Screened compost: Improves soil structure when spread as a thin topdressing. View on Amazon
- Stand-up weed puller: Lets you remove clover roots without bending over. View on Amazon
- Corn gluten meal: A natural pre-emergent that helps suppress new clover seed germination. View on Amazon
FAQ
Can I kill clover in buffalo grass without harming the grass?
Yes, but selectivity depends on the product and timing. Hand pulling and spot treatment with a targeted organic option are the safest approaches. Always test a small area first and follow label directions.
Does corn gluten meal kill existing clover?
No. Corn gluten meal works as a pre-emergent, so it prevents seeds from sprouting. Established clover plants need to be removed by hand or treated separately.
When is the best time to remove clover from a buffalo lawn?
Late spring through early summer is generally ideal, since buffalo grass is actively growing and can recover quickly from aeration and pulling. Avoid heavy treatments during drought or extreme heat.
Will clover come back after I remove it?
It can, especially if the soil is still compacted or the grass is thin. Thickening the turf and monitoring regularly are the best long-term protections.
Is clover bad for a buffalo lawn?
Clover is not inherently harmful, and it supports pollinators. Many owners choose to keep some clover for that reason. The question is whether it is crowding out the grass you want.
How often should I mow buffalo grass to limit clover?
Keep buffalo grass at about 3 to 4 inches and never remove more than a third of the blade height in one mowing. Consistent, higher mowing helps the turf stay dense.
Should I overseed buffalo grass where clover is thick?
Overseeding can help in bare patches, but buffalo grass establishes slowly from seed. Many owners find that aeration and topdressing encourage the existing grass to spread more effectively.
When should I consult a professional?
If clover covers a large share of the lawn or the soil test shows significant problems, a local extension agent or licensed lawn professional can recommend a tailored plan. Check with them before applying any treatment near pets or children.
Conclusion
Getting rid of clover in a buffalo lawn comes down to thickening the grass, correcting the soil conditions that favor clover, and removing what remains by hand or with careful spot treatment. Work through the steps over a full growing season and monitor your lawn regularly. Most owners see steady improvement within one to two years, with fewer clover patches and a denser, easier-to-manage turf.

