Updated November 2026
If you want to get rid of clover in a lawn that has been treated with Scotts products, you can do it in a single growing season by combining better mowing, healthier turf, and targeted spot control. This guide walks through each step in order, explains why clover keeps coming back, and shows where a pollinator-safe approach fits in. Along the way you will see which options suit a Scotts lawn and which ones to skip.
Why Clover Shows Up in a Scotts Lawn
Clover is not a sign that you did something terrible. It is a legume that thrives where turf is thin, where soil nitrogen is low, and where the grass is mowed too short. Many Scotts lawns carry clover for exactly those reasons. The grass is often fed with a conventional fertilizer that pushes quick green growth, then the lawn is cut short and left with bare patches. Clover fills those gaps because it fixes its own nitrogen from the air and tolerates close mowing.
Shopping for one? See our guide: How to Get Rid of Clover in Centipede Lawn: 4 Best Weed Killers Compared (2026).
Before you act, look at the pattern. Clover clustered in bare or compacted spots points to soil problems. Clover spread evenly across the lawn usually points to a feeding or mowing issue. Knowing which one you have will tell you whether to focus on the soil or on your mowing habits.
Step 1: Test Your Soil Before You Do Anything Else
A soil test is the cheapest diagnostic you can run. Most state university extension offices will analyze a sample for pH, phosphorus, potassium, and organic matter, and they will tell you what to add. Clover often moves in when pH drops below about 6.0, so a test can show whether lime is worth considering.
Take samples from several spots, about 3 to 4 inches deep, and mix them in a clean bucket. Avoid taking samples right after a fertilizer application, because the results can read high in nutrients. If you are unsure how to interpret the report, ask the extension office or a local lawn professional to walk you through it.
Step 2: Adjust Your Mowing Height
Scotts lawns are often cut too short for the grass species in them. Short mowing stresses turf and gives clover light and room to spread. Raise the mower deck so the grass is kept at the height suited to your species.
- Tall fescue and mixed cool-season lawns: keep at 3 to 4 inches.
- Kentucky bluegrass: 2.5 to 3.5 inches.
- Warm-season grasses such as Bermudagrass or zoysia: 1 to 2 inches, depending on the species.
Cut no more than one-third of the blade length at any single mowing. Keep your blades sharp, because dull blades tear the leaf tips and invite disease. Clover tends to lose ground once the turf is allowed to shade it out.
Step 3: Feed the Grass, Not the Clover
Clover thrives on low nitrogen, so the most effective long-term move is to build up the grass. Choose a slow-release, organic-based fertilizer and apply it on the schedule suited to your grass type. Many Scotts products are formulated for quick green-up, which can feed clover and turf alike, so if you use one, read the label and apply at the lower end of the rate.
A Simple Seasonal Feeding Schedule
| Season | Action | Why It Helps |
|---|---|---|
| Early spring | Light feeding once soil warms | Supports grass before clover flushes |
| Late spring to early summer | Core feeding with slow-release fertilizer | Builds thick turf that shades clover |
| Late summer to early fall | Heavier feeding for cool-season grass | Strengthens roots before winter |
| Late fall | Light feeding if needed | Helps early spring green-up |
Avoid heavy feeding in the middle of summer for cool-season grass, since heat plus fertilizer can stress the turf and open more bare spots for clover to take over.
Step 4: Overseed Thin Areas
Bare and thin patches are where clover establishes first. Overseeding fills those gaps with grass that can outcompete it. Rake or aerate the thin areas, scatter seed at the rate listed on the bag for your species, and keep the soil lightly moist until germination, which usually takes one to three weeks depending on grass type and temperature.
Aerating in fall with a core aerator makes a large difference on compacted lawns. The holes give new seed good soil contact and let air and water reach the roots.
Step 5: Spot-Treat Remaining Clover
Once the lawn is thickening, you can remove clover that is left. Hand-pulling works well on small patches, especially after rain when the soil is soft. Pull the whole root, not just the leaves, or it will regrow from the crown.
For larger patches, a spot treatment with a selective broadleaf herbicide can help. Read the label carefully and apply only to the clover, on a calm day, and keep the product off flowers. Choose a product labeled for clover control in your turf type, and wait for the manufacturer’s recommended interval before mowing or letting pets and children back onto the area. If you prefer a pollinator-safe route, skip chemical treatments entirely and rely on the steps above.
Step 6: Keep Up the Routine
Clover returns when the conditions that favored it come back. Mow high, feed on schedule, overseed thin spots each fall, and check the lawn every few weeks during the growing season. Most homeowners see the clear improvement within one growing season and a steady decline in clover after two or three.
If you want a deeper look at how clover fits into a bee-friendly yard, the related guides below can help you decide how much clover you want to keep.
Checklist: Tools and Supplies You Will Need
- Soil test kit or extension sample bag
- Mower with adjustable deck and sharp blades
- Slow-release fertilizer suited to your grass type
- Grass seed matched to your region and turf
- Core aerator or hand rake
- Hand weeding tool or dandelion weeder
- Selective broadleaf herbicide labeled for clover, if you choose to spot-treat
Common Mistakes
- Cutting too short. This is the most common cause of clover in an otherwise healthy lawn.
- Feeding too heavily in hot weather. Stressed grass opens space for clover.
- Pulling only the top growth. Clover regrows from the crown if you leave the root.
- Overseeding without loosening the soil. Seed on hard, compacted ground rarely takes.
- Ignoring the soil test. pH problems can quietly favor clover for years.
- Spraying during bloom. Blooming clover draws bees, so avoid treating flowers and open blooms.
Tips for Better Results
- Water deeply and less often to encourage deeper grass roots.
- Leave grass clippings on the lawn when you mow, as long as they are not in clumps.
- Track progress with photos taken from the same spot each month.
- Plan your spring work for when the soil is workable but not saturated.
FAQ
Will clover die on its own if I stop feeding it?
Not quickly. Clover is a perennial that persists in thin turf. It declines gradually as grass fills in and shades it, usually over one to two growing seasons.
Is clover bad for a lawn?
Clover is not harmful to grass and adds some nitrogen to the soil. Many homeowners keep it on purpose for its low maintenance and value to pollinators. Whether you want it gone depends on the look you are after.
When is the best time to spot-treat clover?
Early spring or early fall, when temperatures are mild and grass is actively growing, usually gives the best results. Avoid treating during heat waves or drought.
Can I overseed right after treating clover?
Check the label of any herbicide you used. Many products require a waiting period before reseeding. When in doubt, wait a few weeks or confirm with the manufacturer.
Does mowing height really matter that much?
Yes. Mowing too short is one of the biggest drivers of clover, because it weakens the grass and gives clover light and room to spread.
How long until I see results?
Most lawns show noticeable improvement within one growing season of consistent mowing, feeding, and overseeding. Full recovery can take two or three seasons.
Should I hire a professional?
If the lawn has severe compaction, drainage problems, or a large infestation, a lawn care professional or your local extension office can help you choose a plan. Consult a professional before applying any restricted-use product.
Conclusion
Getting rid of clover in a Scotts lawn comes down to healthy turf: mow high, feed the grass on a steady schedule, fill thin spots, and remove what remains by hand or with a targeted treatment. Clover will not vanish overnight, but a consistent routine usually restores a dense lawn within a season or two. Keep the bee-friendly approach in mind as you work, and choose the methods that fit your yard and your goals.
Related reading
- How to Get Rid of White Clover in Lawn: 6 Steps That Work Without Harming Bees
- How to Get Rid of Purple Clover in Lawn: 6 Steps Without Harming Bees
- How to Get Rid of Japanese Clover in Lawn: 6 Steps That Work
- How to Get Rid of Clover in Lawn Organically: 6 Steps That Work
- How to Get Rid of Clover in Lawn Naturally: 6 Steps That Work

